FULL COURSE CONTENT WILL BE AVAILABLE ON 5/19/26

Whether you're building cabinet doors, decorative boxes, or fine furniture, the router table is one of the most powerful tools in your shop — if you know how to use it right. In Advanced Router-Table Techniques, Woodsmith's Phil Huber walks you through the essential joinery methods that separate solid, professional results from frustrating, sloppy fits. From frame-and-panel construction to box joints and splined-miters, Phil covers not just the what, but the why — including common mistakes (like using the wrong bit) and smart setups that make every cut consistent and repeatable. Whether you're refining your router table skills or ready to tackle more complex joinery, you'll come away with practical techniques and shop-tested jigs and add-ons that you can put to work immediately.

What You'll Learn:

• Why you might be using the wrong bit for grooves
• How to cut consistent grooves and properly sized stub tenons
• Loose tenon and cope-and-stick joinery
• Spline miter jigs for both frame miters and box/case miters
• How to rout dadoes accurately on long workpieces
• Box joints three ways: using a commercial jig, a simple shop-made jig, and an adjustable finger jig
• Using box-slotting bits for cutting clean slots for box bottoms
• Specialty techniques: rabbeting doors for glass, cutting narrow double-sided profiles, and zero-clearance fence inserts
• Using a micro-adjust fence — and practical workarounds if you don't have one

 Approximate running time: 2 Hours

Looking for another course? Click here to see all online learning courses from Woodsmith.